6 Steps: How to Clean Headlights with Baking Soda!

Having a dirty headlights is risky. It could be dangerous for you to drive the car. Here is the steps on how to clean headlights with baking soda!

Headlights are the main source of light for vehicles. It emits light and gives good lighting when you need it. Headlights are covered by a cover to keep them safe.

Your car’s headlights are one of its most important safety features. They emit light to allow you to see where you’re going, especially at night or in bad weather conditions.

Having clean headlights makes your driving fun and safe.

However, the headlights could be dull and dirty. This of course will jeopardize your trip.

Don’t worry!

You don’t have to spend much money to clean it. In fact, you just need to use your household item to make it clean!

Let me show you how to clean headlights with baking soda effortlessly!

Why should you clean your headlights?

1. Dirty headlights can reduce visibility

A dirty headlight will block some of the light that comes from the bulb, which makes it difficult for you to see clearly at night or during bad weather conditions like fog and rain.

When the headlight lenses are dirty, they don’t reflect light properly and you can’t see as well at night.

This condition makes driving a hazard because you can’t see ahead well. It could lead to an accident that could lead to injury or death.

Headlights also help to make sure that other people on the road can see you clearly as well, which is important for safety reasons.

2. Improve the overall appearance of your vehicle

Headlights may be small, but they make a big difference in how people perceive your vehicle.

If your headlights are clean and bright, people will think that you have taken good care of your car. If they are dull and dirty, they will think that you do not care about them.

This can affect how people judge you as an individual, as well as how they judge other aspects of your life.

Why should you use baking soda to clean your headlights?

1. Baking soda is cheap

It is best to use baking soda to clean your headlights because it is cheap. You can buy it at the nearest store for a few dollars. Also, you may have it in your kitchen.

2. Baking soda is a mild abrasive

You can use baking soda to clean headlights because baking soda is a mild abrasive.

Baking soda is made from sodium bicarbonate and carbon dioxide. It’s a neutral pH, so it won’t harm your paint or the sealant on your headlights.

Baking soda is a natural solution

Because baking soda is a natural cleaner, it has no harmful effects when you use it.

You can touch it even without gloves. It also leaves no streak so you don’t have to worry when using it.

You can also use baking soda to clean toothbrush or cleaning shoes!

How to clean headlights with baking soda

1. Prepare the materials


To clean the headlights, prepare the following materials:

  • 2 tablespoons of baking soda
  • 100 ml of water
  • a sponge
  • a microfiber cloth
  • a cotton bud

2. Create the baking soda solution

Pour 2 tablespoons of baking soda and 100 ml of water into a container. You can use a spoon to mix the solution well. Swirl the mixture until smooth

3. Dip the sponge into the solution and rub the headlights


After creating the baking soda solution, take your sponge and dip it into the mixture. Then, use it to clean the headlights.

If you have large headlights, use a circular motion to get rid of any dirt.

Repeat this process 2-3 times to make sure there is no residue.

Wipe down both sides of the headlight so that both sides are equally clean!

The baking soda will remove the grime from your headlights while also preventing them from becoming cloudy again.

4. Use a cotton bud to scrub the headlights


A cotton bud is an effective cleaning tool. It could reach the area of the tiny hole without leaving any streaks.

To do this, wet the end of your cotton bud to the baking soda solution and scrub the headlights. Check the edge and the hard-to-reach area because this is the area where dirt collects but is rarely cleaned.

Your cotton bud will turn to black and full of dirt after do this step.

5. Rinse under running water

Then, use running water to rinse the headlights. The flow will remove the dirt and stain on the surface.

Also, it will make your headlights lighter and brighter.

Do it thoroughly to the whole headlights.

6. Wipe with a dry microfiber cloth

Next, take a dry microfiber cloth and wipe it on the wet headlights. The soft material will absorb the water instantly.

Give a soft scrub so the cloth will get rid of the remaining residue.

Make sure that they are completely dry before taking your car to the road!

How to maintain your headlights last longer

1. Check your headlights regularly

You can maintain your headlights last longer by checking your headlights regularly.

Check them before driving at night. You should also be sure that they are clear of any dirt or debris.

If you notice any cracks or chips, it is best to have them repaired immediately because they can become worse over time.

2. Apply an UV coating


You can maintain your headlights last longer by applying a UV coating.

The coating will protect your headlights from oxidation and fading.

The coating will also help prevent the yellowing of plastic headlights.

A UV coating will help protect against the sun’s rays that damage your headlights over time. You need to use it if you are living in a high-temperature area.


Cleaning car headlights are essential to keeping your vehicle safe and looking great.

The safety of your vehicle comes first and as we all know, when a car’s headlights are not in the best condition it can be difficult for you to see the road at night.

Let me summarize how to clean headlights with baking soda in nutshell!

  1. Prepare the materials
  2. Create the baking soda solution
  3. Dip the sponge into the solution and rub the headlights
  4. Use a cotton bud to scrub the headlights
  5. Rinse under running water
  6. Wipe with a dry microfiber cloth

Baking soda is also a great option to clean coins!

Do not hesitate to leave a comment!